Bộ điều khiển dây dò nhiệt Signaline SLP-001

Bộ điều khiển dây dò nhiệt Signaline SLP-001

0 sold

  • Nhiệt độ báo động cố định là 68°C
  • Không có báo động sai
  • Lên đến 3.000m mỗi vùng
  • Nhiều tùy chọn sửa chữa
Mã SP: SLP-001 Category:

Bộ điều khiển SGNL-SLP-001 cho cáp dò nhiệt tuyến tính. Giám sát tối đa hai vùng 3 km ở chế độ độc lập hoặc xen kẽ. Tích hợp chỉ báo nguồn, báo động và lỗi. IP65. Kích thước: 10 x 120 x 60,5mm. Chứng nhận UL 864.

Thông số kỹ thuật Bộ điều khiển dây dò nhiệt Signaline SLP-001

Model Signaline LocatorPlus (SLP-001)
Dimensions 180 x 120 x 60.5mm HxWxD
IP Rating IP65
Finish Light Grey with clear lid
Display 2 line, 16 character backlit display showing zone status
Approvals UL 864 10th ed.
Operating voltage 12-36Vdc
Operating current <12mA <4mA
Alarm current <40mA <15mA
Operating temp. range -20°C – +50°C (-4°F – +122°F)
Terminal blocks Spacing 5mm Rising Clamp
Rating 16A
Wire size 0.08mm2 (28AWG) to 4mm2 (11AWG)
Supervised circuits Power, Input Zone 1 & Input Zone 2
Inputs Up to two zones of Signaline FT or FT-R Linear Heat Detection
Zone length 1-3000m (10,000ft)
End of Line resistor 1kohm (included)
Short circuit current 0.5mA
Max voltage 5V
Ground fault impedance 0ohms
Communications Two wire RS-485 Modbus RTU (field wiring limited to same room to comply with UL listing)
Sounder 2.4kHz 92dBa @ 10cm Buzzer
Alarm 2x Form C volt-free relay contacts (resistive, com­mon)
Max V 30Vac or 42.4Vdc
Max Current 2A Max Switching Power 60W, 62.5VA
Fault 2x Optoisolated phototransistor output (resistive, common)
Max V 35Vdc
Max Current 80mA Max Power Dissipation 150mW